فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها




گروه تخصصی











متن کامل


نویسندگان: 

CARLTON K.

نشریه: 

PHYSICS EDUCATION

اطلاعات دوره: 
  • سال: 

    2000
  • دوره: 

    35
  • شماره: 

    2
  • صفحات: 

    101-105
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    126
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 126

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

Khudhur Sarah Mahmood | Bin Razali Muhammad Fauzinizam | Bin Mahmud Abdus Samad

نشریه: 

JOURNAL OF NANOSTRUCTURES

اطلاعات دوره: 
  • سال: 

    621
  • دوره: 

    15
  • شماره: 

    2
  • صفحات: 

    487-498
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    3
  • دانلود: 

    0
چکیده: 

Orthodontic brackets especially those made from alumina-based ceramics have become more popular due to their superior aesthetics and biocompatibility. However, their brittleness remains a drawback, as they are more likely to chip or break during treatment compared to metal brackets. The objective of this study is to analyze the mechanical deformation of ceramic brackets under varying archwire deflection and oral temperature using finite element analysis. Aesthetic Roth prescription of polycrystalline ceramic bracket with “0.022” inches slot and rectangular NiTi archwire were used. A three-dimensional finite element model was developed to simulate a modified 3-point bending test at magnitudes of deflection ranges from 1 to 6 mm. temperature ranges used was from 26 °C to 56 °C which represented a range of typical oral temperature variations. Stress and strain were recorded at specific reference points within bracket slot at both loading and unloading cycle. The simulation results reveal that deformation in ceramic bracket slots was consistently concentrated at the corner regions across all three ceramic brackets. Both increasing wire deflection and temperature significantly elevated stress levels, often surpassing the fracture strength of the brackets, particularly during the loading cycle. The maximum stress observed during loading was 411.02 MPa at 56 °C for a 6 mm deflection case. Although the unloading cycle exhibited lower stress levels, deflections exceeding 2 mm still posed failure risks, with a maximum recorded stress of 220.19 MPa at 56 °C for a 6 mm deflection case. These findings highlight the critical influence of wire deflection and temperature on the mechanical deformation of ceramic brackets. These findings underscore the critical role of archwire deflection and oral temperature in managing stress distribution and preventing fracture in ceramic brackets. Clinicians should carefully evaluate bracket materials, particularly in cases involving substantial wire activation or elevated oral temperatures and advise patients on temperature-sensitive dietary habits to mitigate the risk of premature bracket failure.    

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 3

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    13
  • شماره: 

    3
  • صفحات: 

    105-121
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    171
  • دانلود: 

    14
چکیده: 

A B S T R A C T temperature is one of the climate elements that has fluctuated a lot over time. When these fluctuations increase and decrease more than normal and are placed in the upper and lower regions of the statistical distribution, if continued, it can lead to the creation of Heating and cooling waves. The purpose of this study is to analyze the temporal and spatial changes in Heating and cooling waves in Iran during a period of 50 years. For this purpose, the temperature of 663 synoptic stations from 1962 to 2004 was obtained from the Esfazari database. Then, in order to complete this database, the daily temperature from 2004 to 2011 was obtained from the Meteorological Organization of the country and added to the aforementioned database. In order to perform calculations and draw maps, Matlab, grads and Surfer software have been used. The results of this study showed that the index of cooling waves and Heating waves, while having a direct effect on each other, had an increasing trend in most of the area of Iran. The statistical distribution of the index of cooling waves is more heterogeneous than that of the index of Heating waves. So that the spatial variation coefficient for cold waves is 84.22%. Also, the index of cooling waves has more spatial variability. The highest common diffraction of the index of Heating and cooling waves has been seen in the northwest, east and along the Zagros mountains. Analysis of the indexes trends show that Heat waves have intensified in 65.8% of Iran and the intensity of cold waves has decreased in 48.5% of Iran Extended Abstract Introduction temperature is one of the major climatic variables, which it has a direct impact on different aspects of human life. It plays an essential role in the growth of crops and is considered a key driver of the biological system(Reicosky et al, 1988). It is associated with several types of extremes, for example, Heat and cold waves which caused human societies maximum damage. Past occurrences of Heat waves hitherto had significant impacts on several aspects of society. Have increased Mortality and morbidity. Ecosystems can be affected, as well as increased pressure on infrastructures that support society, such as water, transportation, and energy(Dewce, 2016). The long-term change of extreme temperatures has a key role in climatic change. The form of statistical distribution and the variability of mean values and also extreme event indicate a change in the region. It can be a small relative change in the mean as a result of a large change in the probability of extreme occurrence. Also, the variation in temperature data variance is significantly more important than the mean, for assessing the extreme occurrence of climate(Toreti and Desiato, 2008). The average surface temperature has increased the world between 0.56 and 0.92 ° C over the past 100 years(IPCC, 2007). Meanwhile, it was in the Middle East, the average daily temperature increased by 0.4-0.5 ° C in decades(Kostopoulou et al, 2014; Tanarhte et al, 2012). Considering that not many studies have been done in the field of spatio-temporal Variations of the Heating and cooling waves thresholds in Iran, in this study, the spatio-temporal Variations of the Heating and cooling waves thresholds in Iran during 50 years were examined and analyzed.   Methodology The daily temperature from the beginning of the year 21/03/1967 to 19/05/2005 was obtained from the Esfazari database prepared by Dr. Masoudian at the University of Isfahan. In order to increase the time resolution of the mentioned database, the daily temperature of observations from 05/21/2005 to 05/12/2012 has been added to the mentioned database using the same method, and the exact spatial resolution (15 x 15 km) is used as a database. Threshold indices of Heating waves are the average numbers between the 95th and 99th percentiles, that is, the extreme hot threshold to the limit of excessively extreme hot. For extreme cool, from the 5th percentile down to zero is used. Of course, a condition was added to these thresholds, which is that these thresholds must be repeated two days in a row. These thresholds were extracted for each day in the 50 years of the study period and used as the original database. In order to analyze the relationship between cooling and Heating waves, Pearson's correlation coefficient was used and regression was used to analyze the trend.   Results and discussion The average of cold waves was 5.26 ° C and for the Heat waves is 30.20° C. Generally, if the temperature is upper or lower than this threshold, it is considered as hot or cold temperatures. A comparison of the median, mode, and average of cold waves with Heat waves shows that the distribution is more heterogeneous for cold waves and its CV is 84.22%. In southern Iran, the average threshold Heat waves are higher. This situation can be caused by the effects of subtropical high-pressure radiation, low latitude, and proximity to the sea. Though the threshold is higher in these areas, fewer fluctuations and changes are seen in the area. Heights moderate the temperature so they pose a minimum threshold for Heat waves i.e. an iso-threshold of 25 ° C is consistent along the Zagros mountain chains, but in the west and east of Zagros Mountains, the threshold of Heat waves is increased. Heat waves have increased in most areas of the country. So nearly 85 percent of the Iran has been an increasing trend, of which 65.8 percent is statistically significant at the 95% confidence level. Still, more areas of the country (60 percent) have a trend between 0.00828 and 0.00161. As can be seen, only 15% of the land area (including the southwest and northwest of the Country) had decreased Heat waves. Cold waves, in most parts of the country, have a Positive Trend. However, about 25 percent of the study area's cold waves have a negative trend. they are located in areas higher than Latitude 30°. The largest decline of the wave's trend along the country is highlands. Nowadays, most of the country, has a trend between 0.01494 and 0.00828 ° C, respectively. Conclusion Common changes and effects of Heat and cold waves had a direct relationship in many parts of the country. It is remarkable common variance in the East reached 55 percent, according to statistical significance. In some areas of the northwest and southwest, which have been impressive heights, the common variance is 40 percent. This common variance in mountains area has been high values. Investigation of Heat waves trend shows that 65.8% of Iran significant positive trend and 7.1% significant negative trend. Also, the cold waves trend has indicated a 48.5% significant positive trend and a 10.8% significant negative trend. Climate change and global warming have changed the frequency and severity of temperature extremes. The present study, by examining the number of warm waves, concluded that the warm waves have increased in magnitude in 65.8% of the Iran zone. Also, the study of the cold waves trend showed that 48.5 percent of Iran had a positive trend, which means that the amount of temperature in the cold waves increased In other words, the severity of the cold has been reduced And only 10.8 percent of Iran had a negative cold wave trend And it shows the intensity of these waves is reduced.   Funding There is no funding support.   Authors’ Contribution The authors contributed equally to the conceptualization and writing of the article. All of the authors approthe contenttent of the manuscript and agreed on all aspects of the work declaration of competing interest none.   Conflict of Interest The authors declared no conflict of interest.   Acknowledgments  We are grateful to all the scientific consultants of this paper.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 171

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 14 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
نشریه: 

Iranian Polymer Journal

اطلاعات دوره: 
  • سال: 

    2022
  • دوره: 

    31
  • شماره: 

    10
  • صفحات: 

    1283-1295
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    50
  • دانلود: 

    0
چکیده: 

Polypropylene (PP)/postconsumer recycled poly(ethylene terephthalate) (rPET) blend has gained much attention as an environmentally friendly and economical material in various industrial applications. The aim of this study is to improve the properties of PP/rPET blend with talc, glass fiber, and carbon fiber mixture to be included by twin-screw extrusion followed by injection molding. Maleic anhydride grafted polypropylene (PP-g-MA) and chain extender (Joncryl ADR 4368) were used as the coupling agent. The effects of various coupling agents were evaluated in terms of the mechanical, morphological, electrical, and thermal properties of the PP/rPET hybrid composites. The mechanical properties of the composites were characterized by tensile and Charpy impact tests. Scanning electron microscopy (SEM) was used to assess the fracture surface morphology and the dispersion of the filler. The thermal properties of the composites were characterized using differential scanning calorimeter (DSC), Heat deflection temperature (HDT), and Vicat softening temperature (VST) tests. The results showed that the composites morphology was dramatically affected by the addition of coupling agent. Tensile and impact strength increased in the presence of coupling agent of the composite due to the improved interaction at the interface of polymers. HDT and VST of the composite were increased significantly in the presence of PP-g-MA.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 50

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
عنوان: 
نویسندگان: 

نشریه: 

اطلاعات دوره: 
  • سال: 

    1401
  • دوره: 

    172
  • شماره: 

    -
  • صفحات: 

    -
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    24
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 24

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

DARYA BEYGI K.

اطلاعات دوره: 
  • سال: 

    2003
  • دوره: 

    17
  • شماره: 

    1
  • صفحات: 

    10-20
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    171
  • دانلود: 

    0
کلیدواژه: 
چکیده: 

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 171

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
نویسنده: 

BAYATI A. | HAMIDI A.

اطلاعات دوره: 
  • سال: 

    2004
  • دوره: 

    9
تعامل: 
  • بازدید: 

    199
  • دانلود: 

    0
چکیده: 

Heat EXCHANGER FOULING IS A MAJOR SOURCE OF MAINTENANCE COST AND LOST PRODUCTION TIME. IT HAS BEEN ESTIMATED THAT FOULING COSTS MORE THAN $5 BILLION ANNUALLY IN US INDUSTRY. ALTHOUGH CLEANING IS TIME CONSUMING AND COSTLY BUT IT IS NEEDED TO BE PERFORMED FREQUENTLY BECAUSE FOULING ON Heat TRANSFER SURFACE REDUCES THE Heat TRANSFER RATE AND INCREASE PRESSURE DROP THROUGH THE Heat EXCHANGER. WITH THIS REGARD, SPIRAL Heat EXCHANGER IS A USEFUL ALTERNATIVE TO MANY TRADITIONAL Heat EXCHANGERS AND APPLICATIONS PRONE TO FOULING SUCH AS IN CHEMICAL PROCESS AND FOOD INDUSTRIES. SINCE MOST OF INDUSTRIES IN OUR COUNTRY ARE NOT FAMILIAR WITH THIS KIND OF Heat EXCHANGER BECAUSE OF INSUFFICIENT INFORMATION, THIS PAPER PROVIDES THE PROCEDURE TO DETERMINE THE BASIC DESIGN PARAMETERS AND DEMONSTRATES THE ADVANTAGE OF SPIRAL Heat EXCHANGER.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 199

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0
اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    22
  • شماره: 

    130
  • صفحات: 

    43-70
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    106
  • دانلود: 

    40
چکیده: 

آسایش حرارتی، یکی از مشخصه های مهم و مؤثر بر سلامتی و کارایی بدن انسان است که منسوجات در تأمین این مشخصه نقش به سزایی دارند. در این راستا منسوجات مهندسی شدۀ بسیاری با تنظیم سازوکار های مختلف حرارتی پیشنهاد شده است. در مطالعۀ حاضر، پیشرفت های اخیر در زمینۀ کنترل فعال و غیر فعال دما (منسوجات گرم کننده، سردکننده و دوحالته) با تأکید بر سازوکار مؤثر بر انتقال حرارت در منسوج مورد نظر،بیان شده است. درپایان، روش های به کار گرفته شده، مقایسه و به چالش ها و فرصت های موجود در این زمینه اشاره شده است.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 106

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 40 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

MEHRABIAN M.A.

اطلاعات دوره: 
  • سال: 

    2003
  • دوره: 

    27
  • شماره: 

    B3
  • صفحات: 

    573-588
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    369
  • دانلود: 

    0
چکیده: 

The purpose of this paper is to develop analytical-numerical solutions to work out the longitudinal temperature changes of flow in the passages of a plate Heat exchanger. The solution for a general variation in U, except for some special cases, becomes so complicated as to be impractical. In this regard uniform Heat flux, constant U, linearity between U and T and linearity between U and ؤ T will be studied. The results are then compared with the established experimental data available in the literature using similar plate dimensions and flow details.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 369

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

SOBAMOWO GBEMINIYI M. | KAMIYO OLA M.

اطلاعات دوره: 
  • سال: 

    2017
  • دوره: 

    3
  • شماره: 

    4
  • صفحات: 

    229-239
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    218
  • دانلود: 

    0
چکیده: 

In this study, by using the finite volume method, the Heat transfer in a convective straight fin withtemperature-dependent thermal properties and an internal Heat generation under multi-boiling Heat transfer modesare analyzed. In this regard, the local Heat transfer coefficient is considered to vary within a power-law function oftemperature. In the present study, the coexistence of all the boiling modes is taken into consideration. Thedeveloped Heat transfer models and the corresponding numerical solutions are used to investigate the effects ofvarious thermo-geometric parameters on the thermal performance of the longitudinal rectangular fin. The resultsshows that the fin temperature distribution, the total Heat transfer, and the fin efficiency are significantly affected bythe thermo-geometric parameters of the fin and the internal Heat generation within the fin. The obtained results canprovide a platform for improvements in the design of the fin in the Heat transfer equipment.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 218

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
litScript
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
email sharing button
sharethis sharing button